Footmotion Forefoot (US) Your solution for the forefoot
The implants of the Foot and Hand Motion range are intended for the fixation of bone fractures and osteotomies, and for arthrodeses of the foot and hand in adults.
Newclip Technics has developed a range of screws and instruments for foot surgery and more specification surgery to treat Hallux Valgus. The Footmotion range thus includes Ø2.25mm to Ø4.0mm headed and headless cannulated screws, solid screws for Weil and Chevron osteotomies and drills of percutaneous forefoot surgery and stainless-steel staples.
The Footmotion range stands out, among others, by its patented 3-in-1 instrumentation and its single use sterile kits (Initial S Foot)
Our solutions for the forefoot
Cannulated self-compressive screws
Weil Screws
Compressive screws
Bevelled screws
Percutaneous surgery
Three diameters of self-tapping, self-drilling and self-compressive cannulated screws are available:
- Ø2.25mm, cannulated for Ø0.8mm pin L10mm to L34mm
- Ø2.6mm, cannulated for Ø1.0mm pin L10mm to L40mm
- Ø3.0mm, cannulated for Ø1.0mm pin L10mm to L40mm
The screws are available in non-sterile or sterile (S-box) version
The screws may be used with a standard instrumentation (Footmotion) or with our single use sterile solution (Initial S Foot).
Two types of screws are available for Weil osteotomies
- Ø2.0mm screw with a hexagonal screwdriver
- Ø2.0mm self-drilling snap-off screw: detachable proximal section at end of screwing, thus minimising the use of a screwdriver. Available in lengths 11mm to 15mm to adjust to anatomical differences.
However, a screwdriver is available to finalise the screwing if necessary.
There are two head diameters available:
- Ø3.5mm with screws ranging from 14mm to 50mm:
- Guided along a Ø1.2 mm pin
- Only associated with a single use sterile instrumentation (Initial S Foot)
- Ø4.0mm with screws ranging from 26mm to 70mm:
- Guided along a Ø1.3 mm pin
- Sterile single use instrumentation (Initial S Foot) or standard.
These two screws are available separately in sterile version (S-box).
The Ø3.5mm cannulated and bevelled screws were specifically developed for the treatment of Hallux Valgus in percutaneous surgery. The screws have a 45° bevel in the threaded head. Once it has been correctly indexed at the end of screwing, the bevel will minimise the protrusion of the head.
These bevelled screws are proposed with the 3-in-1 instrumentation technology.
The screws may be used with a standard instrumentation (Footmotion) or with our single use sterile solution (Initial S Foot).
Newclip Technics proposes a complete range of percutaneous reamers designed for forefoot, midfoot and rearfoot.
The reamers are available in straight or helical flute versions of Ø2.0mm to Ø4.0mm, length 8mm to 30mm to efficiently respond to the needs of surgeons in terms of percutaneous surgery.
An associated range of instruments is also proposed for the management of soft tissues in this surgical approach (blade holder, beaver, elevator, rasps, etc.).